Lessmann 2019 GB FINAL

79 78 10 20 30 40 50 60 70 80 90 0 5 000 10 000 15 000 20 000 25 000 4 3 2 5 7 1 1 2 3 4 5 6 7 B D 6 Knot End Brushes Item Nos. in bold are available ex stock. Consider our minimum order value for italic printed article numbers (see page 152). STH = steel wire, high tensile, straight STM = brass coated steel, crimped RO4 = stainless steel wire, straight, 1.4401 BRUSHES WITH SHANK Knotted End Brushes with Shank According to the RPM the brush will vary in dimension and enable the user to work in hard to reach areas such as drilled holes and recesses of all kinds. The cups of the knot end brushes with stain- less steel wire are coated with plastic to protect the stainless surface. Knotted end brushes with stainless steel wire are green characterized. Further information on working on stainless steel you find at www.lessmann.com * filled with epoxy resin Special End Brushes with Shank 6 Ø, one Knot One-knotted End Brushes to render precise working possible. End Brushes, filled with epoxy resin End Brushes filled with epoxy resin are able to treat small, defined areas. The brushes are more aggressive and allow a precise han- dling, hence they are used e.g. for electrical cabinets or for treating mounting surfaces. Knot End Brushes with Shank Ø 6 mm, Steel Wire D1/D2 GL H Z ZF RPM Pack. STH 0.15 | 0.006“ STH 0.25 | 0.010“ STH 0.35 | 0.014“ STH 0.50 | 0.020“ mm | inch mm | inch mm | inch max. Art.-No. Art.-No. Art.-No. Art.-No. 6/10 | 1/4/3/8 65 | 2 1/2 25 | 1 1 D 4,500 10 available on demand 451.258 451.278 available on demand 19 | 3/4 72 | 2 7/8 28 | 1 6 B 20,000 10 453.258 453.278 453.298 22 | 7/8 72 | 2 7/8 28 | 1 8 B 20,000 10 454.238 454.258 454.278 454.298 29 | 1 1/8 72 | 2 7/8 28 | 1 12 B 20,000 10 available on demand 456.258 456.278 456.298 19 | 3/4 72 | 2 7/8 28 | 1 4 B 20,000 50 available on demand available on demand 452.278.GH* available on demand Knot End Brushes with Shank Ø 6 mm, Brass coated steel wire D1/D2 GL H Z ZF RPM Pack. STM 0.25 | 0.010“ STM 0.35 | 0.014“ mm | inch mm | inch mm | inch max. Art.-No. Art.-No. 19 | 3/4 72 | 2 7/8 28 | 1 6 D 20,000 10 453.758 453.778 22 | 7/8 72 | 2 7/8 28 | 1 8 D 20,000 10 454.758 454.778 29 | 1 1/8 72 | 2 7/8 28 | 1 12 D 20,000 10 456.758 456.778 Knot End Brushes with Shank Ø 6 mm, Stainless Steel Wire D1/D2 GL H Z ZF RPM Pack. RO4 0.15 | 0.006“ RO4 0.25 | 0.010“ RO4 0.35 | 0.014“ RO4 0.50 | 0.020“ mm | inch mm | inch mm | inch max. Art.-No. Art.-No. Art.-No. Art.-No. 6/10 | 1/4/3/8 65 | 2 1/2 25 | 1 1 D 4,500 10 available on demand 451.458 451.478 available on demand 19 | 3/4 72 | 2 7/8 28 | 1 6 B 20,000 10 453.338 453.358 453.378 453.398 22 | 7/8 72 | 2 7/8 28 | 1 8 B 20,000 10 454.338 454.358 454.378 454.398 29 | 1 1/8 72 | 2 7/8 28 | 1 12 B 20,000 10 456.338 456.358 456.378 456.398 Opening of the end brushes depending on the RPM Diameter in mm RPM in 1/min. 453.298 Ø 19 STH 0.50 453.278 Ø 19 STH 0.35 453.258 Ø 19 STH 0.25 453.238 Ø 19 STH 0.15 456.278 Ø 29 STH 0.35 454.278 Ø 22 STH 0.35 Z = number of knots B: Rose Bud D: Fully knotted (wire ends are cut completely) Knot types ZF