Lessmann 2019 GB FINAL

45 44 1 2 1 2 Debur r i ng Brushes Item Nos. in bold are available ex stock. Consider our minimum order value for italic printed article numbers (see page 152). STH = steel wire, high tensile, crimped STM = brass coated steel, crimped STL = cord wire, crimped DEBURRING BRUSHES Deburring Brushes Specially developed wheel brushes for de- burring. These are suitable for all common deburring machines. Although they are heav- ier than other brushes because of their dense filling, we exclude any inbalance by evenly arranged filling material and the testing of every brush. Filled with high-quality wire, these brushes have a longer service life. All brushes are with double keyway. Please indicate the required bore. On the following pages you will find the standard measurements. Special measure- ments are available on request. Deburring Brushes with Cord Wire STL / ROL Deburring Brushes with cord wire are usual- ly used for working on very hard materials. This wire construction gives the wires addi- tional hold, hence the output of the brush is increased. Encapsulated Deburring Brushes Are ideal for an aggressive and very exact working. An early beak of the wires can be prevented. Therefore the brush has a longer life time and a better durability. Stainless Steel Brushes LESSMANN brushes with stainless steel wire have green site plates. More information for brush applications on stainless materials you will find at www.lessmann.com For more information about deburring please ask for our leaflet “Deburring with brushes”. All brushes with metal disc and bore 50.8 mm and double keyway 13 x 7 mm! Further standard bores: 52.9 / 54.5 mm; d min/max: 30 mm ≤ d ≤ R; Deburring Brushes also available with tube 120. Deburring Brushes, Steel Wire D A EB R H d RPM Pack. STH 0.20 | 0.008“ STH 0.35 | 0.014“ STH 0.50 | 0.020“ mm | inch mm | inch mm | inch mm | inch Stand. max. Art.-No. Art.-No. Art.-No. 250 | 10 60 | 2 3/8 58 100 | 4 50 | 2 50.8 3,600 1 377.051 377.053 377.054 250 | 10 60 | 2 3/8 55 100 | 4 50 | 2 100 3,600 1 377.051.00 377.053.00 377.054.00 250 | 10 60 | 2 3/8 53 100 | 4 50 | 2 50.8 3,600 1 377.051.T1 377.053.T1 377.054.T1 250 | 10 60 | 2 3/8 50 100 | 4 50 | 2 100 3,600 1 377.051.TA 377.053.TA 377.054.TA 250 | 10 80 | 3 1/4 79 100 | 4 50 | 2 50.8 3,600 1 377.052 377.095 377.077 250 | 10 100 | 4 99 100 | 4 50 | 2 50.8 3,600 1 377.059 377.066 377.096 300 | 12 60 | 2 3/8 49 100 | 4 60 | 2 3/8 50.8 3,000 1 387.051 387.053 387.054 300 | 12 100 | 4 93 100 | 4 60 | 2 3/8 50.8 3,000 1 available on demand 387.055 available on demand Deburring Brushes, Cord Wire, Brass Coated Steel Wire D A EB R H d RPM Pack. STL 0.38 | 0.015“ STM 0.38 | 0.015“ mm | inch mm | inch mm | inch mm | inch Stand. max. Art.-No. Art.-No. 250 | 10 60 | 2 3/8 58 100 | 4 50 | 2 50.8 3,600 1 377.043 377.063 250 | 10 60 | 2 3/8 55 100 | 4 50 | 2 100 3,600 1 377.043.00 377.063.00 250 | 10 60 | 2 3/8 53 100 | 4 50 | 2 50.8 3,600 1 377.043.T1 377.063.T1 250 | 10 60 | 2 3/8 50 100 | 4 50 | 2 100 3,600 1 377.043.TA 377.063.TA 250 | 10 80 | 3 1/4 79 100 | 4 50 | 2 50.8 3,600 1 377.045 available on demand 250 | 10 100 | 4 99 100 | 4 50 | 2 50.8 3,600 1 377.048 available on demand Part before brushing Part after brushing