Lessmann 2019 GB FINAL

41 40 1 2 3 4 6 6 7 7 8 5 1 2 3 4 5 8 6 7 Accessor i es WHEEL BRUSHES Bore must be indicated! * On request with double keyset 12 x 7 (50.8 / 52.9 / 54.5) Drive Arbors For use on drilling machines. Metal Discs Brushes with tube diameter 80 and 100 mm are supplied with our standard metal plates made of steel. Occasionally these metal plates are also required for brushes with smaller tubes. The metal plates on this page are therefore also suitable for the brushes on page 31 - 33. Please indicate the required bore size on your order and note that nor- mally two metal plates are required for one brush. Adapters With these adapters the bore can be reduced to the required size. The wheel brushes are supplied with adapt- er sets which makes it possible to mount the brushes on all popular grinding machines. The adapters have the following dimensions: Set 1 / tube 30 30 / 1 " / 22,2 / 20 / 16 / 1/2 " / 12 Set 2 / tube 40: 40 / 32 / 1 " / 22,2 / 20 / 16 / 1/2 " Set 3 / tube 50: 50 / 32 / 1 " / 22,2 / 20 / 16 / 1/2 " Set 4 / tube 80 + 100: brushes with metal discs, bore 50.8 and double keyway 7x13; plus adapter to bore 30. Further reduction possible with set 1. Set 5 / tube 80 + 100: brushes with metal discs, bore 50.8 and double keyway 7x13; plus adapter to bore 32. Further reduction possible with set 1. A technical advice and safety information leaflet is included. The practical adapter sets can also be ordered separately. Single plastic reducing rings in many different dimensions can be supplied ex stock. Adapter Sets D d Pack. Art.-No. Set 1 Tube 30 30 1" - 22.2 - 20 - 16 - 1/2" - 12 2 000.886.63 Set 2 Tube 40 40 32 - 1" - 22.2 - 20 - 16 - 1/2" 2 000.886.64 Set 3 Tube 50 50 32 - 1" - 22.2 - 20 - 16 - 1/2" 2 000.886.65 Set 4 Tube 80/100 50.8 30 (further adapters with Set 1) 2 000.886.68 Set 5 Tube 80/100 50.8 32 2 000.888.32 Single plastic reducing rings in many different dimensions can be supplied ex stock. Item Nos. in bold are available ex stock. Consider our minimum order value for italic printed article numbers (see page 152). Drive Arbors D mm | inch GL mm | inch d AB RPM max. Pack. Art.-No. 6 | 1/4 60 | 2 3/8 M 10 x 1,5 max. 18 mm 4,500 1 000.041 10 | 3/8 60 | 2 3/8 M 10 x 1,5 max. 18 mm 4,500 1 000.042 10 | 3/8 75 | 3 M 14 x 2,0 max. 11 mm 4,500 1 000.043 D mm | inch GL mm | inch d AB RPM max. Pack. Art.-No. 6 | 1/4 40 | 1 3/8 M 10 left max. 30 mm 4,500 1 000.044 6 | 1/4 50 | 2 M 12 left max. 15 mm 4,500 1 000.045 Metal Discs as Spare Part Pack. Art.-No. R 30 2 000.631 R 40 2 000.641 R 50 2 000.651 R 80 2 000.661 R100* 2 000.671 Adapter Drive Arbor Thread left Drive Arbor Thread right