Lessmann 2019 GB FINAL

37 36 5 6 4 7 8 2 1 8 1 2 3 1 6 5 4 7 3 Spec i a l Mode l s WHEEL BRUSHES Band Saw Brushes Wheel Brushes in circular saws or band saws are used for cleaning the chipping space. A wheel brush with diameter 80-100 mm is pressed against the saw blade (circular or band saw). By moving the saw blade or band the brush is rolling and it taking the chipping out of the shipping space. Hence a built-up edge is prevented and the durability of the saw blade extended. The used wheel brushes usually are with steel wire, corded wire or ny- lon filament. The brushes are suitable for all common machines. Item Nos. in bold are available ex stock. Consider our minimum order value for italic printed article numbers (see page 152). STA = steel wire, crimped STM = brass coated steel, crimped STL = cord wire, crimped PA = polyamide, crimped Stripping Brushes D A d Pack. STA 0.10 | 0.004“ STA 0.15 | 0.006“ STA 0.20 | 0.008“ STA 0.25 | 0.010“ STA 0.30 | 0.012“ mm | inch mm | inch mm | inch Art.-No. Art.-No. Art.-No. Art.-No. Art.-No. 30 | 1 1/4 20 | 3/4 6 | 1/4 10 301.213.10 301.213.15 301.213.20 301.213.30 35 | 1 1/2 20 | 3/4 6 | 1/4 10 301.214.15 301.214.20 available on demand 301.214.30 40 | 1 3/8 25 | 1 10 | 3/8 10 301.225.15 301.225.20 301.225.25 301.225.30 80 | 3 30 | 1 1/4 16 | 5/8 10 301.236.20 available on demand 301.236.30 Stripping Brushes For the removal of laquer and other insula- tions from cables and electric equipment. The polished surface and the concentric running enable soft removal of laquer from the wires. Band Saw Brushes, polyamide D A H d RPM Pack. PA 0.50 | 0.020“ PA 0.80 | 0.031“ PA 1.00 | 0.039“ max. Art.-Nr. Art.-No. Art.-No. 85 10 14 12 8,000 10 300.091 100 13 21 12 8,000 10 320.001 320.003 320.009 100 13 21 13 8,000 10 320.004 100 13 21 SW 17 8,000 5 320.00K.17 100 20-22 23 12 8,000 10 323.002 100 20 23 12 8,000 5 323.003* 125 13 33 13 8,000 5 330.001 Band Saw Brushes, steel wire D A H d RPM Pack. STA 0,20 STA 0,30 STM 0,20 STM 0,30 STL 4 x 0,25 max. Art.-No. Art.-No. Art.-No. Art.-No. Art.-No. 80 12 20 10 15,000 10 312.141 100 12 21 SW 17 8,000 5 320.16K.17 100 13 21 12.7 4,500 10 320.161.12 60 10-12 19 6 15,000 10 300.742 80 15 27 6.8 15,000 10 311.742.01 80 15 27 8 15,000 10 311.762 80 18-20 27 6 15,000 10 310.702.06 * bore with plastic sleeve „A“ can be up to 4 mm larger than „BD“ EB 3,0 mm with R > 60 EB 2,4 mm with R ≤ 60