Lessmann 2019 GB FINAL

105 104 I nter i or Brushes INTERIOR BRUSHES Item Nos. in bold are available ex stock. Consider our minimum order value for italic printed article numbers (see page 152). STH = steel wire, high tensile, straight ROH = stainless steel wire, high tensile MES = brass wire PA = polyamide SIC = silicon carbide bristles Micro Interior Brushes IBH, Steel Wire, Stainless Steel Wire D GL A d RPM Pack. STH 0.12 | 0.005“ STH 0.20 | 0.008“ ROH 0.12 | 0.005“ ROH 0.20 | 0.008“ mm | inch mm | inch mm | inch mm | inch max. Art.-No. Art.-No. Art.-No. Art.-No. 6 | 15/64 90 | 3 1/2 25 | 1 3.2 | 1/8 3,500 10 564.220.60 8 | 5/16 90 | 3 1/2 25 | 1 3.2 | 1/8 3,500 10 564.220.80 10 | 25/64 90 | 3 1/2 25 | 1 3.8 | 5/32 3,500 10 565.321.00 565.341.00 565.521.00 13 | 33/64 90 | 3 1/2 25 | 1 3.8 | 5/32 3,500 10 565.321.30 565.341.30 565.521.30 16 | 5/8 90 | 3 1/2 25 | 1 3.8 | 5/32 3,000 10 565.321.60 565.341.60 565.521.60 565.541.60 19 | 3/4 90 | 3 1/2 25 | 1 3.8 | 5/32 3,000 10 565.321.90 565.341.90 565.521.90 565.541.90 20 | 51/64 90 | 3 1/2 25 | 1 3.8 | 5/32 3,000 10 565.342.00 565.542.00 21 | 53/64 90 | 3 1/2 25 | 1 3.8 | 5/32 3,000 10 565.322.10 565.342.10 24 | 15/16 90 | 3 1/2 25 | 1 3.8 | 5/32 3,000 10 565.322.40 25 | 1 90 | 3 1/2 25 | 1 3.8 | 5/32 3,000 10 565.322.50 565.342.50 565.522.50 565.542.50 29 | 1 9/64 90 | 3 1/2 25 | 1 3.8 | 5/32 3,000 10 565.322.90 565.342.90 565.542.90 32 | 1 17/64 90 | 3 1/2 25 | 1 3.8 | 5/32 3,000 10 565.323.20 565.343.20 565.543.20 Micro Interior Brushes IBH, Brass Wire and Polyamide D GL A d RPM Pack. MES 0.15 | 0.006“ MES 0.20 | 0.008“ PA 0.30 | 0.012“ mm | inch mm | inch mm | inch mm | inch max. Art.-No. Art.-No. Art.-No. 8 | 5/16 90 | 3 1/2 25 | 1 3.2 | 1/8 3,500 10 565.730.80 10 | 25/64 90 | 3 1/2 25 | 1 3.8 | 5/32 3,500 10 565.731.00 565.061.00 13 | 33/64 90 | 3 1/2 25 | 1 3.8 | 5/32 3,500 10 565.731.30 565.061.30 16 | 5/8 90 | 3 1/2 25 | 1 3.8 | 5/32 3,000 10 565.731.60 565.061.60 20 | 51/64 90 | 3 1/2 25 | 1 3.8 | 5/32 3,000 10 565.742.00 565.062.00 25 | 1 90 | 3 1/2 25 | 1 3.8 | 5/32 3,000 10 565.742.50 565.062.50 Microabrasive Interior Brushes IBE, Silicon Carbide Bristles D GL A d RPM Pack. SIC 120/0.6 SIC 320/0.6/**0,3 SIC 1000/0.25 mm | inch mm | inch mm | inch mm | inch max. Art.-No. Art.-No. Art.-No. 1.2 | 3/64 100 | 4 12 | 15/32 0.7 | 1/32 500 10 545.200.12* 1.9 | 5/64 100 | 4 18 | 4 5/64 0.7 | 1/32 500 10 545.200.19 2.2 | 3/32 100 | 4 18 | 4 5/64 0.9 | 1/32 1,000 10 543.200.22** 545.200.22 2.6 | 7/64 100 | 4 25 | 1 1.0 | 3/64 1,000 10 543.200.26** 545.200.26 3.2 | 1/8 100 | 4 25 | 1 1.7 | 1/16 1,000 10 543.200.32** 545.200.32 4.2 | 11/64 125 | 5 25 | 1 2.2 | 3/32 1,000 10 541.200.42 543.200.42** 545.200.42 5.5 | 7/32 125 | 5 25 | 1 2.2 | 3/32 1,000 10 541.200.55 543.200.55** 545.200.55 6 | 15/64 125 | 5 65 | 2 9/16 3.0 | 1/8 1,500 10 541.200.60 543.200.60 545.200.60 8 | 5/16 125 | 5 65 | 2 9/16 3.0 | 1/8 1,500 10 541.200.80 543.200.80 545.200.80 10 | 25/64 125 | 5 65 | 2 9/16 3.7 | 9/64 2,000 10 541.201.00 543.201.00 545.201.00 13 | 33/64 125 | 5 65 | 2 9/16 3.7 | 9/64 2,000 10 541.201.30 543.201.30 545.201.30 16 | 5/8 125 | 5 65 | 2 9/16 5.2 | 13/64 2,000 10 541.201.60 543.201.60 545.201.60 19 | 3/4 125 | 5 65 | 2 9/16 5.2 | 13/64 2,000 10 541.201.90 543.201.90 545.201.90 20 | 51/64 125 | 5 65 | 2 9/16 5.7 | 7/32 2,000 10 541.202.00 22 | 7/8 125 | 5 65 | 2 9/16 5.7 | 7/32 2,000 10 541.202.20 543.202.20 545.202.20 25 | 1 125 | 5 65 | 2 9/16 5.7 | 7/32 2,000 10 541.202.50 543.202.50 545.202.50 28 | 1 7/64 125 | 5 65 | 2 9/16 5.7 | 7/32 2,000 10 541.202.80 543.202.80 545.202.80 30 | 1 3/16 125 | 5 65 | 2 9/16 5.7 | 7/32 2,000 10 541.203.00 543.203.00 545.203.00 32 | 1 17/64 125 | 5 65 | 2 9/16 5.7 | 7/32 2,000 10 541.203.20 543.203.20 545.203.20 38 | 1 1/2 125 | 5 65 | 2 9/16 5.7 | 7/32 2,000 10 541.203.80 Mechanical Application Only use the brush with the indicated max- imal peripheral speed (RPM max.). The max. RPM only is allowed when the brush is clamped min. for 10 mm into the tool. When the brush is inserted into the suitable work piece, higher RPMs are possible. Only use the brush right rotating. * Type IB: with straight / clipped off point