KUKKO Katalog 18-19

75 www.KUKKO.com 02 For pulling internal ball bearings, ball bearing outer rings and bushings. The bearings are securely grasped by the internal puller, in the inner ring, and quickly removed using the clamping effect. In order to be able to remove a bea- ring with an internal puller, a counter support or a slide hammer from series 22 will always be required. Just scan and experience KUKKO! The QR codes guide you to more information and usage videos online Mode of operation When using a counter stay, en- sure that the jaws of the counter stay do not block the part being removed. Note: the internal extractors must grip firmly underneath the part to be removed. If there is too little space in the bushing below the part to be removed, an internal extractor from series 21-E may be used.. Safety instructions for internal pulling Many of the KUKKO internal extractors in the 21 series (not 21-E) can be expanded using an extension (series 21-V) for extracting parts set deep inside a bushing. The KUKKO slide hammers can be used in combination with the threadadapters 22-1-AS anywhe- re where the threaded pin can be screwed directly into the part that needs to be removed. Accessories: Extensions Accessories: Thread adapters KUKKO tool factory Internal extracting