KUKKO Katalog 18-19

156 ST 71-M Art.- No. mm Stück mm mm Stück 71-M -772788 25 - 35 1 32 360 4 ST 59 Art.- No. mm mm Stück pieces K-59-1/14 -000461 3,28 - 5,72 6,3 - 19 59-1, 59-1-1, 59-1-2, 58-1 14 i-Boxx ST 225 Art.- No. mm mm 225-1 -123405 30 - 50 25 22-0-1, 22-2 225-2 -123412 50 - 70 25 22-0-1, 22-2 225-3 -123429 70 - 90 30 22-0-1, 22-2 + + KUKKO tool factory Automotive special A world in motion since 1919! Chain splitting and riveting tool For splitting and riveting single strand roller chains. Description • For single strand roller chains per DIN 8187 and a bolt diameter of 3.28 – 5.72 mm • The frame of the motorcycle (frame, swing arm) often makes it necessary to separate the chain direct- ly on the vehicle. Use of "inappropriate" tools such as screwdrivers or something similar is very likely to result in injury. Advantage • Set includes a pressure adapter to properly adjust the distance of the riveting bolts. This ensures there is never too much pressure on the chain during attachment. Steering head bearing fitting tool kit For installation of steering head bearings on motorcycles Description • Set is suitable for all motorcycles. • The following are also included in the set: 1 sealing grip device for hoses. • Specifically intended for the replacement of the steering head bearing. • Instructions and conversion table in the cover. • Secure storage in special foam. Advantage • The special shape of the impact ring allows for the power to be transmitted only to the internal ring during pressing or hammering of the tapered roller bearing. • This means that the bearing cage will not be destroyed. • The combination of impact ring and impact sleeve required for the installation of the ball bearing can be found in the table inside the case cover. • The axes, bearing casings and gaskets of the bearing will not be damaged. • The impact rings have a rubber ring and ensure locking at the strike pipes. 3-jaw puller with self-centering jaws For removing bearings, gears, discs, etc. Description • Spring-loaded, special shape with self-centring pulling jaws. • The quick-release lock allowed a fast replacement of the jaws. Advantage • Spring-loaded hooks hold the device in place on the object to be pulled. • The extractors can be combined with the KUKKO counterstays 22-2, 22-3 and with slide hammers 22-0-1.