KUKKO Katalog 18-19

www.KUKKO.com 13 01 KUKKO tool factory External extracting 3rd step: Howmuch force is required? 4th step: Select model Puller with mechanical pressure spindle Puller with long hydraulic spindle A normal amount of pressure is required. The selected pulling tool normally states the necessary power and pulling force. However, in order to be absolutely sure, you should always choose the largest possible model for dimension ranges which cross over. Detailed dimension and performance details for all models can be found at www.KUKKO.com High pressure is required because the part to be removed is particularly secure, or rusted. For example: Diameter: 142 mm / 120 mm / 135 mm Depth: 135 mm / 120 mm / 220 mm Available space: unlimited Specification: There must be pulled various bearings at different depths. Target: We are looking for a puller which can be individually adapted. According to the puller guide should be used pullers with sliding puller arms that are always parallel. The bearings are on the shaft. According to the puller guide should be used a puller with a mechanical spindle. According to the KUKKO website choose the pullers from series 20 and 30 in size 2. The decision falls to : 30-2+ Advantage: • with the 3-jaw model, you have the best possible load distribution and a particularly secure hold. • You can adjust your puller to the relevant reach by buying the extensions. • The quick adjusting capability allows the reach to be changed quickly. 1st step: Measuring the space available 2nd step: Selection of puller type 3rd step: Howmuch force is needed? 4th step: Select model