KUKKO Katalog 18-19

12 KUKKO tool factory External extracting A world in motion since 1919! Requirement: · The puller is used for various applications. · The puller must be able to change characteristics e.g. increase the reach etc. Requirement: · The same removal application is always used. Requirement: · The same removal application is always used. · Same application at different depths. Requirement: · The bearing is flush. · It is especially important that the puller arms do not slip off. 1st step: Measuring the space available 2nd step: Selection of the puller type pull pull pressure The puller jaws can bemoved continuously (even asymme- trically) on the cross-beam, and can be fixed to the cross- beam using a bolt connecti- on or knurled knob. 11 ; 20; 20+; 20-S; 20+S; 20-S-T 20-S+T; 30; 30+; 30-S; 30+S 30-S-T; 30-S+T; 110; 120; 130 The jaws and the cross-beam are connected by movable brackets. As the spindle pulls, the jaws tense and tighten firmly. An additional option is swi- vel-jaws pullers. Reversing the puller jaws expands or reduces the reach. 41; 42; 46; 47; 201; 203; 205 206; 207; 208; 209 The two puller jaws are connected to each other. The pullers therefore ensure au- tomatic self-tensioning and self-centering of the jaws. 43; 44; 45; 482; 483; 844; 845 The part to be remo- ved is on a shaft and is freely accessible from the outside! Selection of the right external puller Puller with self-centering puller jaws (autogrip) Puller with sliding, parallel puller jaws Puller with swivel puller jaws Puller with side tension clamps. Recommendation of KUKKO Recommendation of KUKKO Recommendation of KUKKO Series available Series available Series available Recommendation of KUKKO diameter defines the spreads depth defines max. reach available space defines the size of the puller jaw 194-199 To remove fitting parts the puller jaws grab beneath the part to be removed when pul- ling on the side clamps and loosen the part even before the actual pulling process. The clamp presses the puller jaws securely onto the part to be removed. This ensures that the puller jaws do not slip off. 204; 210 Series available