Hazet SWW 2021

59 15 Made in Germany 3 Made in Germany 1847-12/15 EAN-No. 4000896 221288 90° We accept no liability for printing errors! OFFICIAL SUPPLIER You can find further information on all items at: www.hazet.de 1847-090/2 Pair of clamping jaws, angled 90° Pair of clamping jaws 90° for difficult to access stainless steel bands 206711 1847-02/2 Pair of clamping jaws Pair of clamping jaws for steering gear boots AUDI A4 / A5 / A6 / A7 / Q5 174447 1847/3 Clamp pliers for axle boots 1847 with replaceable jaws 90° (1847-090/2) 206902 Chassis | Cardan shafts Circlip pliers set • Easier, damage-free assembly of the drive shaft joint: Damage to the serration of joint and shaft is avoided with internal circlip during assembly of the drive shaft joint • Correct, centred insertion of the circlip when mounting the joint on the drive shaft • Easy fixing of the locking pliers over the circlip without damaging the bellows • The pliers automatically slip down when striking the joint • Suitable for drive shafts from all manufacturers • No other tools needed Contents: − Circlip pliers 1847-12 − 7x pairs of half shells in graduated diameter sizes: − Half shells x : 19 ∙ 21.4 ∙ 22.3– 23 ∙ 23.8 – 24.6 ∙ 26.2 – 26.9 ∙ 28.5 – 29.2 ∙ 30 mm IN PARTNERSHIP WITH Application tip: • Insert appropriate half shells in pliers depending on shaft diameter • Place pliers on serration with pre-assembled circlip and clamp • Pre-positioning of the hinge due to conical shape of the pliers makes it easier to introduce the serration without damage 1 Designation Application / installation EAN-No. 4000896+ 1847 Clamp pliers for axle boots For installing axle boots made of Hytrel and bands made of special stainless steel with pre-set torque values, in conjunction with e.g. torque wrench HAZET 5110-3CT / 6110-1 CT 050918 Set Accessories In application with clamping jaws 1847-090/2