Hazet SWW 2021

special worldwide 2021 58 1847 12 Made in Germany 1847-02/2 1847-090/2 4935-11/12 EAN-No. 4000896 217434 4797-1 EAN-No. 4000896 121175 Made in Germany Made in Germany You can find further information on all items at: www.hazet.de Chassis | Cardan shafts Drive shaft disassembly / assembly set • For disconnecting the drive shaft joint and pulling in the shaft through the wheel hub with just one tool • Disconnecting the drive shaft joint from the shaft using the sleeves or spindles in conjunction with e.g. HAZET sliding hammer 4797-1 (not included) • Pulling in the drive shaft through the wheel hub on vehicles where the drive shaft is very difficult to pull through the wheel hub • Suitable for all vehicle brands • For drive shafts with outside and inside thread Contents: − 2x spindles (M14, M16) to pull the drive shaft through the wheel hub or separate the joint from the drive shaft when the joint has an inside thread − 2x sleeves for support on the wheel hub − Spindle nut − 7x screw sleeve adapters − M16 x 1.5 (VAG, MAZDA) − M18 x 1.5 (Volvo, SUZUKI, OPEL/VAUXHALL) − M20 x 1.5 (MERCEDES-BENZ, VAG, MITSUBISHI, MAZDA) − M22 x 1.5 (FIAT, PSA, BMW, FORD, OPEL, HYUNDAI) − M24 x 1.5 (RENAULT, BMW, MERCEDES-BENZ, OPEL/VAUXHALL, MAZDA, HONDA, VAG) − M27 x 1.5 (PSA, BMW, FORD) − M30 x 1.5 (MERCEDES-BENZ, PSA, BMW) IN PARTNERSHIP WITH Clamp pliers for axle boots Sliding hammer • M 16 x 1.5 • Striking weight: 1.8 kg • Length: 460 mm