Hazet 2019 Tool Catalogue

J U V e9 Made in Germany ß U V r8 Made in Germany ß U V r7 Made in Germany ß U V e Made in Germany ß U V r Made in Germany 2849 2871-E12 4550 4550 2850 G F D R C O A U 459 Components and spare parts from page 474 to 482 Valid until December 31, 2019 Specialty tools Commercial vehicle – Engine Commercial vehicle Engine Cylinder head • For the operation of cylinder head bolts ​• Reinforced design • Long design • With borehole for locking pin or safety spring and grove for O-ring • Surface: phosphatised, oiled h Impact socket 1 K G H r c 4 • MAN commercial vehicles F 2000, F 90, F 8 and MAN buses with D 25 and D 28 engines 2850-E 20 110 25 44 18.49 15 079681 • MAN commercial vehicles with Common Rail Engine (D20) 2850-E 24 110 30 44 22.16 17.5 146758 Fuel System / Fuel Injection • Operation of the turbocharger nuts on MAN HGVs ​• Bent form of the box wrench is especially adapted to the confined spaces • Ergonomically shaped HAZET 2-component handle Single box-end wrench 1 K 4 2849-15 266 159284 • Lower installation height than nut-driver with reversible ratchet • Application: For operating the turbocharger and manifold screws (E12) • On MAN TGL ∙ TGM with E08 engines • Drive Ä 17 mm Operation e.g. with ratcheting combination wrench 606-17 or insert box-end wrench 6630 d-17 and tool holder 6397 (screw loosening) with torque wrench 6292-1 CT (screw tightening) • Necessary due to limited space • Surface: phosphatised, oiled Turbocharger / manifold h socket 1 K 4 2871-E 12 28 201730 • Open 12-point socket • Application: Operating screwed connections on injection lines • Surface: chrome-plated • On MAN commercial vehicles with D 20 engines – common rail injection systems • Short style • j Drive 10 = 3 ⁄ 8 ” Injection line wrench 1 S K 4 4550-3 17 83 104307 • The special design of the socket ensures the injection line screw connection is properly accommodated • Application: For the operation of the union nut on the high-pressure line on the injection valve-common rail injection system • Open 12-Point Socket for the operation of screwed connections on injection lines • The tightening torque required by the manufacturer is achieved by using a HAZET torque wrench (observe manufacturer specifications) • Surface: burnished • DAF Euro 6 engines MX11/ MX13 e.g. XF ∙ CF • j Drive 12.5 = 1 ⁄ 2 ” Injection line wrench 1 S K G H c 4 4550-21 21 91 33 32 19 204137