Hazet 2019 Tool Catalogue

J ß U T YouTube Clip J ß T Made in Germany YouTube Clip 4797-1  4797-2  4797-3  4797-9  ß YouTube Clip 4797 4591 4797 4798 G F D R C O A U 385 Components and spare parts from page 474 to 482 Valid until December 31, 2019 Specialty tools Engine – Fuel System / Fuel Injection ​• Application: For disassembly of tight common rail injectors without removing the cylinder head Injector extractor 1 K è 4 • For e.g. MERCEDES-BENZ CDI engines 611 ∙ 612 ∙ 613 etc. • Especially suitable for the limited spaces due to the cylinder head cover 4797/2 460 2 121205 • Impact extractor • M 16x1.5 • Striking weight: 1.8 kg 4797-1 460 – 121175 • Injector claw • M 16x1.5 4797-2 130 – 121182 • External adapter with inside thread M16x1.5 on M27x1 • For the removal of Bosch injectors with outside thread M27x1 • In conjunction with impact extractor 4797-1 • Operating mode: The External Adapter must be used when the Injector Claw cannot be used, either because of the vehicle type or because of the lack of space. Note: Always replace the injector that has been removed with the External Adapter! 4797-3 50 – 121199 • Piezo injector claw • Removal of Piezo injectors on MERCEDES-BENZ engines OM 651 • The design of the injector claw, tuned to the injector, ensures optimal reception of the injector during operation • MERCEDES-BENZ : A-class type 176 ∙ B-class type 246 ∙ C-class type 204, 205 E-class type 212 ∙ S-class type 221, 222 ∙ V-class typ 639, 447 CLA type 117 ∙ GLA type X156 ∙ GLK type X204 CLS type 218 ∙ ML type 166 ∙ SLK/SLC type 172 ∙ GLC type X253 • For operation with the HAZET impact extractor 4797-1 • Inside thread: M16x1.5 mm 4797-9 54.5 – 206667 ​• For MERCEDES-BENZ CDI engines. Suitable for reaming the broken-off expansion bolt M6x1 from the cylinder head without removing the valve cover • Enormous money and time saving as the replacement of cylinder head and the removing of injectors and valve covers is not necessary • Damaged thread is reworked to M8  x 1 Contents: 1 twist drill 6 mm with spacer sleeve 1 tap M8x1 1 drill sleeve 1 step drill 7 to 8 mm with spacer sleeve 1 knob for screwing in 5 threaded inserts M6x1 • SmartCase (1/9) 165-S • Safety-Insert-System, 2-component soft foam insert. Insert also suitable for HAZET Assistent Thread repair tool set for injector fastening screw ​ 1 LxWxH mm è 4 4797/10 185x153x52 10 191505 • Enables the removal of the injectors without removing the electrical connector or injector head • Advantage: without any previous injector defect, reinstallation is possible without recalibration • Application: Removal of diesel injectors on the brands Bosch, Delphi, Siemens, Denso using a sliding hammer • Universal set • Contents for the removal according to type of construction and available space: – 1 Special pliers for the secure grip in the clamping jaw receptacle on the injector – 2 Handle with joint adapter for pulling and twisting the injectors at the same time. Handles can optionally be mounted onto the inner or outer thread of the utility service line – 1 Bosch special adapter for a secure encompassing grip of the injectors and a guaranteed consistent transfer of power • SmartCase (1/3) 165-L • Safety-Insert-System, 2-component soft foam insert. Insert also suitable for HAZET Assistent​ Universal injector extraction tool set ​ 1 LxWxH mm è 4 4798-6/8 355x235x65 8 210763 • Very quick sealing of pipes and preventing fluids from escaping • Application: Sealing pipelines in brake systems, air conditioning systems, power steering and fuel systems that cannot be secured with a flexible hose clamp • Sealing in sizes of 6.3 mm ( 1 ⁄ 4 ″) ∙ 8 mm ( 5 ⁄ 16 ″) ∙ 10 mm ( 3 ⁄ 8 ″) and for double sealing (e.g. banjo connections) in sizes of 10 mm ( 3 ⁄ 4 ″) Pipe stopper set 1 4 4591/4 219650