Hazet 2019 Tool Catalogue

W T U V 3 T U V / 3 B U V 3 YouTube Clip C W T U V 3 9012 9012 9012 SPC 315 Components and spare parts from page 474 to 482 alid until December 31, 2019 Pneumatic tools / machinery ​ 1 Ú Nm Y Nm ? l/min. ^ rpm N db(A) LpA 5 4 9012 MT 1400 745 135 9000 92.7 1320 203598 • Loosening torque: 1400 Nm ​• Exhaust air is guided through the handle downwards • Reduced vibrations • Easy handling • Extra short – only 100 mm • Powerful twin hammer mechanism • Air connection inlet (from the compressor): inside thread (IG) 16.41 mm ( 3 / 8 ″) • Coupler plug: nominal size 7.2 (included) • Recommended torque: 620 Nm • Hose diameter (recommended): 10 mm • Working pressure (bar): 6.3 • Sound power level: 102 db(A) Lp W • Vibration acceleration: 8.74 m/s 2 • Screw size M: 16 • Forward and reverse: three- stage (forward and reverse) • Cold insulated handle • Mounting bracket • One-hand operation – for right and left handed operators equally usable Impact wrench • Loosening torque: 450 Nm ​• 360° exhaust air guidance, adjustable on the handle • Reduced vibrations • Easy to use • Extra short – only 69 mm • Single hammer striking mechanism • Air connection inlet (from the compressor): inside thread (IG) 12.91 mm ( 1 / 4 ″) • Coupler plug: nominal size 7.2 (included) • Recommended torque: 231 Nm • Hose diameter (recommended): 10 mm • Working pressure (bar): 6.3 • Sound power level: 103.2 db(A) Lp W • Vibration acceleration: 9.96 m/s 2 • Screw size M: 16 • Forward and reverse: three-stage (forward), single-stage (reverse) • Cold insulated handle • Ultra compact design enables work even in cramped and hard-to-reach areas • One-hand operation for right and left-handed operators ​ 1 Ú Nm Y Nm ? l/min. ^ rpm N db(A) LpA 5 4 9012 A-1 450 325 113 8500 92.2 1160 218301 Impact wrench ​ 1 Ú Nm Y Nm ? l/min. ^ rpm N db(A) LpA 5 4 9012 EL-SPC 1700 1054 139 8000 98 1980 188444 • Loosening torque: 1700 Nm ​• Exhaust air is guided through the handle downwards • Reduced vibrations • Easy handling • Powerful twin hammer mechanism • Air connection inlet (from the compressor): inside thread (IG) 16.41 mm ( 3 / 8 ″) • Coupler plug: nominal size 7.2 (included) • Recommended torque: 881 Nm • Hose diameter (recommended): 10 mm • Working pressure (bar): 6.3 • Sound power level: 109 db(A) Lp W • Vibration acceleration: 10.23 m/s 2 • Screw size M: 16 • Forward and reverse: four-stage (counterclockwise rotation), single- stage (clockwise rotation) • Cold insulated handle • One-hand operation by innovative changeover on rear of device Impact wrench