Hazet 2019 Tool Catalogue

W T U V / 3 U V 3 W T U V 3 YouTube Clip B YouTube Clip C W T U V / 3 9012 M-S  YouTube Clip 9012 9012 314 alid until December 31, 2019 Components and spare parts from page 474 to 482 Pneumatic tools / machinery 1 Ú Nm Y Nm ? l/min. ^ rpm N db(A) LpA 5 4 9012 P-1 1000 685 127 7500 94.4 2540 212330 • Version with high-quality twin hammer mechanism at an attractive price-performance ratio ​• Exhaust air is guided through the handle downwards • Reduced vibrations • Easy handling • Powerful twin hammer mechanism • Air connection inlet (from the compressor): inside thread (IG) 16.41 mm ( 3 / 8 ″) • Coupler plug: nominal size 7.2 (included) • Recommended torque: 550 Nm • Hose diameter (recommended): 10 mm • Working pressure (bar): 6.3 • Sound power level: 105.4 db(A) Lp W • Vibration acceleration: 12.24 m/s 2 • Screw size M: 16 • Forward and reverse: three-stage (forward), single-stage (reverse) • Cold insulated handle • Enhanced power performance due to efficient air guide and improved pull-up torque of the air motor • Specially heat-treated inner parts for minimised wear • Ergonomically shaped handle and housing for optimised handling and operation Impact wrench • Loosening torque: 1100 Nm ​• Exhaust air is guided through the handle downwards • Reduced vibrations • Easy handling • Extra short – only 92 mm • Single hammer striking mechanism • Air connection inlet (from the compressor): inside thread (IG) 12.91 mm ( 1 / 4 ″) • Coupler plug: nominal size 7.2 (included) • Recommended torque: 610 Nm • Hose diameter (recommended): 10 mm • Working pressure (bar): 6.3 • Sound power level: 108.1 db(A) Lp W • Vibration acceleration: 9.57 m/s 2 • Screw size M: 16 • Forward and reverse: three-stage (forward), single-stage (reverse) • Cold insulated handle • Extremely compact construction enables working in areas with restricted access • One-hand operation for right and left handed operators 1 Ú Nm Y Nm ? l/min. ^ rpm N db(A) LpA 5 4 9012 M 1100 678 127 10000 97.1 1242 188987 Silicone protective cover 9012 M-S – – – – – – 202232 Impact wrench ​ 1 Ú Nm Y Nm ? l/min. ^ rpm N db(A) LpA 5 4 9012 M-1 1200 678 127.4 8800 92.2 1270 218356 • Loosening torque: 1200 Nm ​• Exhaust air is guided through the handle downwards • Reduced vibrations • Easy handling • Extra short – only 80 mm • Single hammer striking mechanism • Air connection inlet (from the compressor): inside thread (IG) 12.91 mm ( 1 / 4 ″) • Coupler plug: nominal size 7.2 (included) • Recommended torque: 610 Nm • Hose diameter (recommended): 10 mm • Working pressure (bar): 6.3 • Sound power level: 103.2 db(A) Lp W • Vibration acceleration: 13.49 m/s 2 • Screw size M: 16 • Forward and reverse: three-stage (forward), single-stage (reverse) • Cold insulated handle • One-hand operation for right and left-handed operators