Hazet 2019 Tool Catalogue

T V / 3 T U V / 2 YouTube Clip 360° 9012 M-S  9011 M 9012 SPC 313 Components and spare parts from page 474 to 482 alid until December 31, 2019 Pneumatic tools / machinery 1 Ú Nm Y Nm ? l/min. ^ rpm N db(A) LpA 5 4 9011 M 461 461 85.2 6500 90.3 1240 201570 Silicone protective cover 9012 M-S – – – – – – 202232 • Loosening torque: 461 Nm ​• Exhaust air is guided through the handle downwards • Reduced vibrations • Easy handling • Extra short – only 92 mm • Single hammer striking mechanism • Air connection inlet (from the compressor): inside thread (IG) 12.91 mm ( 1 / 4 ″) • Coupler plug: nominal size 7.2 (included) • Recommended torque: 375 Nm • Hose diameter (recommended): 10 mm • Working pressure (bar): 6.3 • Sound power level: 101.3 db(A) Lp W • Vibration acceleration: 7.78 m/s 2 • Screw size M: 13 • Forward and reverse: three-stage (forward), single-stage (reverse) • Cold insulated handle • Extremely compact construction enables working in areas with restricted access • One-hand operation for right and left handed operators Impact wrench ​ 1 Ú Nm Y Nm ? l/min. ^ rpm N db(A) LpA 5 4 9012 SPC 850 750 127.4 7000 92.1 2600 119639 • Loosening torque: 850 Nm ​• Exhaust air is guided through the handle downwards • Reduced vibrations • Easy handling • Powerful pin clutch mechanism • Air connection inlet (from the compressor): inside thread (IG) 12.91 mm ( 1 / 4 ″) • Coupler plug: nominal size 7.2 (included) • Recommended torque: 550 Nm • Hose diameter (recommended): 10 mm • Working pressure (bar): 6.3 • Sound power level: 103.1 db(A) Lp W • Vibration acceleration: 7.42 m/s 2 • Screw size M: 16 • Forward and reverse: three-stage (forward), single-stage (reverse) • Cold insulated handle • Enhanced power characteristics due to new, specially developed air motor as well as efficient air guide and improved pull-up torque of the air motor • Specially heat-treated inner parts for minimised wear • Ergonomically shaped handles and housi ng for improved handling and operation Impact wrench