Hazet 2019 Tool Catalogue

6000-1 CT / Made in Germany 285 Components and spare parts from page 474 to 482 Valid until December 31, 2019 Torque technology System 6000 CT • For highest torque values ​• Release accuracy tolerance ± 3% of scale value (in direction of actuation) (6170-1 CT ± 4%) • Ideally suited to industrial climbers • Application on wind turbines, dockyards, in the aviation and heavy industries, on commercial vehicles etc. • To be disassembled in two parts (6170-1 CT: three parts) with release tool • Bag included for safe storage and for carrying or wearing on your back • Fast screw tightening also possible with ratchet shaft. For torque tightening always use the complete wrench. • 2-component handle for improved feel • Simplified locking for adjusting the torque value • Viewing window for visual checking of the locking • With 3 additional coloured coding rings for markings with personalizations or special workflows • DIN EN ISO 6789-2:2017, Square according to DIN 3120, ISO 1174-1​ Torque wrench ∙ SYSTEM 6000 CT ∙ Release accuracy tolerance ± 3% (6170-1 CT 4%) ∙ 400–2000 Nm 1 Output K 1 5 Release accuracy tolerance % ! Å Nm # 4 1000 Nm Torque wrench Weight only approx. 10 kg • Actuating force only 590 N (60 kg) at 1000 Nm • Length of ratchet shaft 903 mm, handle 930 mm 6150-1 CT i 20 = 3 ⁄ 4 ″ 1789 36 77 3 400–1000 5 24.2 – 61.0 141067 1600 Nm Torque wrench Weight only approx. 14 kg • Actuating force only 685 N (70 kg) at 1600 Nm • Length of ratchet shaft 1205 mm, handle 1320 mm 6160-1 CT i 25 = 1″ 2455 36 77 3 600–1600 5 26.1 – 70.1 155316 2000 Nm Torque wrench Weight only approx. 18 kg • Actuating force only 685 N (70 kg) at 2000 Nm • Calibration according to company standards 6170-1 CT i 25 = 1″ 3033 36 77 4 800–2000 6 27.9 – 70.1 177776 • Torque wrench including DAkkS calibration certificate • 2-component handle for improved feel • Simplified locking for adjusting the torque value • Viewing window for visual checking of the locking • With 3 additional coloured coding rings for markings with personalizations or special workflows 6150-1 CT CAL i 20 = 3 ⁄ 4 ″ 1789 36 77 3 400–1000 5 24.2 – 61.0 193059 6160-1 CT CAL i 25 = 1″ 2455 36 77 3 600–1600 5 26.1 – 70.1 193066