Hazet 2019 Tool Catalogue

= = 277 Components and spare parts from page 474 to 482 Valid until December 31, 2019 Torque technology Incl. 3 further coloured coding rings for personalisation or identifying workflows ATTENTION: Twist lock = RED – do not use, unintended torque variation is possible! Twist lock Ready to be set / NOT usable (Setting not complete) Twist lock Ready for work / usable Open Close Functionality of torque wrench handles from > 100 Nm, e.g. 6143-1 CT etc. (from page 284) • Unlocking • Slide the handle forward approximately 8 mm and gently turn it in the desired direction • After engaging the handle, simply continue turning it to the desired torque (without pressing) • Turn the handle back a little bit • Locking Application examples for coding rings • Fast recognition of individually set Nm ranges e.g. Green = always 250 Nm • Recognition of particular departments/work areas or people e.g. Red = maintenance and repair department • Fast identification the various torque wrenches e.g. Yellow = HAZET 6160-1CT (2 pieces); Red = HAZET 6170-1CT (3 pieces) • Clear allocation of defined workflows e.g. Tools marked with red = workflow 1, Tools marked with green = workflow 2 Torque multiplier Up to 30% less weight than steel versions – only 1.6 kg! 1 Transfer ratio Drive j Output i Nm max. A d mm B mm C mm D mm 6 min. max. 6800 ALU-700 approx. 1:3.5 12,5 = 1 ⁄ 2 ˝ 20 = 3 ⁄ 4 ˝ 700 67 125 149 160 101 2,1 6800 ALU-1400 approx. 1:3.5 20 = 3 ⁄ 4 ˝ 25 = 1˝ 1400 88 172,5 190 212 135 4,8 6800 ALU-Lg 1400 approx. 1:3.5 20 = 3 ⁄ 4 ˝ 25 = 1˝ 1400 88 252,5 216 292 135 4,8 6800 ALU-2800 approx. 1:11 20 = 3 ⁄ 4 ˝ 25 = 1˝ 2800 88 260,5 308 320 176,5 8,3