Hazet 2019 Tool Catalogue

Made in Germany a 276 Valid until December 31, 2019 Components and spare parts from page 474 to 482 Torque technology Conversion Conversion factors of torque values • In action, a HAZET torque wrench signals when it has attained the set torque – audibly by clicking – palpably by close-gap release – visibly by the signal button jutting out a . • Then the working procedure must be stopped immediately. • The greater the set torque, the stronger the audible and palpable signals. Design and Function Pipes hardened and hard chrome-plated • Optimised weight / wall thickness • Robust and protected surface Given unit Desired unit mNm cNm Nm kpm ozf.in lbf.in lbf.ft 1 mNm 1 0.1 0.001 0.0001 0.142 0.009 0.0007 1 cNm 10 1 0.01 0.001 1.416 0.088 0.007 1 Nm 1000 100 1 0.102 141.6 8.851 0.738 1 kpm 9807 980.7 9.807 1 1389 86.8 7.233 1 ozf.in 7.062 0.706 0.007 0.0007 1 0.0625 0.005 1 lbf.in 113 11.3 0.113 0.0115 16 1 0.083 1 lbf.ft 1356 135.6 1.356 0.138 192 12 1 Conversion formula: Given unit x factor = Desired unit Example: Conversion of: 20 lbf.ft to Nm 20x1.356 = 27.12 Nm • A HAZET torque wrench should be checked and readjusted regularly. This is recommended after approx. 5000 screw operations (but this should be no later than twelve months). • The checking frequency depends on the usage frequency. A HAZET torque tester is suitable for this. • If a suitable torque tester with a click point indication is not available, we accept the HAZET torque wrench from your HAZET partner for inspection and adjustment at the factory. • After testing and possible necessary adjustment, the HAZET torque wrenches and HAZET torque testers sent to HAZET are returned to you with a test/calibration certificate. Adjustment/calibration