Hazet 2019 Tool Catalogue

C C U V U V W U V / W U V / B 9033 9033 9033 9033 325 Components and spare parts from page 474 to 482 alid until December 31, 2019 Pneumatic tools / machinery 1 ? l/min. ^ rpm N db(A) LpA 5 4 9033 N-6 102 4000 79 1200 209743 • 5 foil erasers (lighter design) • Adapter 9033-6-010 is required 9033-6-01/5 – – – 1290 160167 • 5 foil erasers (darker version) • For water-based paints • Adapter 9033-6-010 is required 9033-6-01 A/5 – – – 1280 160228 • 5 brush belts 23 mm wide, coarse, bent tips • For removing underbody protection, sealing putty, as well as paint stripping with rough sand-blasting effect • Adapter 9033-6-010 is required 9033-6-02/5 – – – 280 160174 • 5 brush belts 11 mm wide, coarse, bent tips • For removing underbody protection, sealing putty, as well as paint stripping with rough sand-blasting effect • Adapter 9033-6-011 is required 9033-6-03/5 – – – 140 160181 • 5 strip wheels • Adapter 9033-6-041 or 9033-6-040 is required 9033-6-04/5 – – – 150 160198 • 5 brush belts 11 mm wide, fine, straight tips • For removing paint and rust, without sand-blasting effect • Adapter 9033-6-011 is required 9033-6-05/5 – – – 120 160204 • 5 brush belts 23 mm wide, fine, straight tips • For removing paint and rust, without sand-blasting effect • Adapter 9033-6-010 is required 9033-6-06/5 – – – 260 160211 • 1 piece adapter, 23 mm wide for brush belts 9033-6-02/5 ∙ 9033-6-06/5 and foil erasers 9033-6-01/5 ∙ 9033-6-01 A/5 9033-6-010 – – – – 213672 • 1 piece adapter, 11 mm wide for brush belts (9033-6-03/5 ∙ 9033-6-05/5) 9033-6-011 – – – – 213665 • 1 piece adapter for double strip wheels 9033-6-04/5 9033-6-040 – – – – 213641 • 1 piece adapter for single strip wheels 9033-6-04/5 9033-6-041 – – – – 213658 Multi sander Mini polisher set Mini polisher set 1 ? l/min. ^ rpm N db(A) LpA 5 4 9033 N-9 91 3200 85.76 720 205561 • 5 plastic pads yellow hard, foam pad for polishing in the first work step 9033-9-02/5 – – – 50 160556 • 5 plastic pads white soft, for polishing in the second work step 9033-9-03/5 – – – 80 160563 • 5 lambskins for final polishing 9033-9-04/5 – – – 80 160570 ​ 1 ? l/min. ^ rpm N db(A) LpA 5 4 9033 N-7 113 12000 85 2000 205547 • Lateral handle, to be used on left or right side • Quick adjustment (without tools) of protection cover • For grinding discs up to a thickness of 0.8–6 mm • Spindle thread: M 14x2 • For grinding wheels 125x22 mm • Spindle locking • Air connection inlet (from the compressor): inside thread (IG) 12.91 mm ( 1 / 4 ″) • Coupler plug: nominal size 7.2 (included) • Hose diameter (recommended): 10 mm • Working pressure (bar): 6.3 • Sound power level: 96 db(A) Lp W • Vibration acceleration: 6.50 m/s 2 • Power in watts: 671 Watts (0.912 PS) • Cold insulated handle Right-angle grinder • For working in areas with restricted access and repair work • 6-piece set, contents: 1 polisher 1 wet grinding pad, 75 mm ? 1 soft plastic pad (yellow), 1 hard plastic pad (white), 1 lambskin 1 adjusting wrench • Grinding disc thread M6 • Air connection inlet (from the compressor): inside thread (IG) 12.91 mm ( 1 / 4 ″) • Coupler plug: nominal size 7.2 (included) • Hose diameter (recommended): 10 mm • Working pressure (bar): 6.3 • Sound power level: 96.76 db(A) Lp W • Vibration acceleration: 2.43 m/s 2 • Power in watts: 238 Watts (0.324 PS) • Cold insulated handle