Hazet 2019 Tool Catalogue

T U V / T U V / C B X A W U T V X T U V / YouTube Clip YouTube Clip 360° 9032 9032 9032 9032 322 alid until December 31, 2019 Components and spare parts from page 474 to 482 Pneumatic tools / machinery ​ 1 ? l/min. ^ rpm N db(A) LpA 5 4 9032 P-1 150 22000 87 800 190508 • 1 HP strong design – more power due to high- performance device – (4 times the performance of previous model) • Application: For grinding, polishing, burnishing and deburring • Straight design • Collet chuck: 6 mm • High ease of use • Ergonomic design • Air connection inlet (from the compressor): inside thread (IG) 12.91 mm ( 1 / 4 ″) • Coupler plug: nominal size 7.2 (included) • Hose diameter (recommended): 10 mm • Working pressure (bar): 6.3 • Sound power level: 98 db(A) Lp W • Vibration acceleration: 0.46 m/s 2 • Power in watts: 700 Watts (0.952 PS) • Cold insulated handle Die grinder, straight design 1 ? l/min. ^ rpm N db(A) LpA 5 4 9032 P-5 150 12000 89.1 1055 202072 • 1 HP strong design – more power due to high- performance device – (4 times the performance of previous model) • Application: For grinding, polishing, burnishing and deburring, particularly in areas that are difficult to access • Angled design • High ease of use • Ergonomic design • Air connection inlet (from the compressor): inside thread (IG) 12.91 mm ( 1 / 4 ″) • Coupler plug: nominal size 7.2 (included) • Hose diameter (recommended): 10 mm • Working pressure (bar): 6.3 • Sound power level: 82 db(A) Lp W • Vibration acceleration: 0.50 m/s 2 • Collet chuck: 6 mm • Cold insulated handle Die grinder, angled Die grinder, angled ​ 1 ? l/min. ^ rpm N db(A) LpA 5 4 9032 Lg-1 99 2000–22000 81 600 209675 • Straight, long design for improved handling / guidance Die grinder, straight design, long • Application: Handy device for grinding, polishing, burnishing, deburring • Continuous speed regulation via setting wheel on the upper side of the device • Four–jaw chuck • Including air connection nipple • Wide contact surface of the trigger for easy handling • Optimised transmission of the trigger provides optimal dosage • With hanging hole and lug • Handle, trigger and valve made of acetal plastic • Seals and O-rings made of nitrile • Spring made of hardened spring steel • Handle back ergonomically curved and profiled for an optimised feel • Air connection inlet (from the compressor): inside thread (IG) 12.91 mm ( 1 / 4 ″) • Coupler plug: nominal size 7.2 (included) • Hose diameter (recommended): 10 mm • Working pressure (bar): 6.3 • Sound power level: 78 db(A) Lp W • Vibration acceleration: 0.50 m/s 2 • Collet chuck: 6 • Power in watts: 360 Watts (0.489 PS) • Cold insulated handle