Hazet 2019 Tool Catalogue

C U V Made in Germany U V Made in Germany Made in Germany Made in Germany Made in Germany B 1788 N 1788 N 1788 N 1788 N 1788 T 1788 T 238 Valid until December 31, 2019 Components and spare parts from page 474 to 482 Hand tools Internal extractor ​• Application: Extracting ball bearings, outer rings and bushings • To be used with counter stays 1788 N-835 and -4570 + = With reinforced collar for safe removal of needle bearings, ball bearings and brass sleeves​ Internal extractor 1 t R 4 1788 N-12 + 12–14 M10 147694 1788 N-14 + 14–19 M10 147700 1788 N-15 12–15 M10 134861 1788 N-19 15–19 M10 134878 1788 N-25 19–25 M10 134885 1788 N-30 25–30 M10 134892 1788 N-35 30–35 M10 134915 1788 N-45 35–45 M14x1.5 134502 1788 N-55 45–55 M14x1.5 136209 1788 N-70 55–70 M14x1.5 136216 ​• For internal extractors HAZET 1788 N-12 up to -70 • Surface: chrome-plated Counter stay 1 Spindle 4 • For internal extractors 1788 N-12 up to 35 1788 N- 835 M 10 mm 134854 • For internal extractors 1788 N-45 up to 55 1788 N-4570 M 14x1.5 mm 134908 Internal extractor set 1 è 4 1788 N 1788 N-835 • 1788 N-4570 • 1788 N-15 • 1788 N-19 1788 N-25 • 1788 N-30 • 1788 N-35 • 1788 N-45 1788 N/8 8 133185 1788 N 1788 N-835 • 1788 N-4570 • 1788 N-15 • 1788 N-19 • 1788 N-25 1788 N-30 • 1788 N-35 • 1788 N-45 • 1788 N-55 • 1788 N-70 1788 N/10 10 147939 845-1 • 1784-40 • 1787-9 • 1788 N-835 • 1788 N-4570 1788 N-15 • 1788 N-19 • 1788 N-25 • 1788 N-30 • 1788 N-35 1788 N-45 • 1788 N-55 • 1788 N-55 • 1788-532 1798 N/15 15 147960 • For extracting ball bearings, outer rings and bushin gs ​• Internal extractor and counter stay • Sheet metal box (HAZET-blue) Internal extractor set ​• With titanium nitrided surface extra-hard and wear-resistant • For tightly-packed ball bearings, rings, bushings and shaft seals Simmer ® • Made of high-quality, flexible material • Absolutely precise manufacturing accuracy providing a higher power transfer • High ease of use • Only 4 Internal Extractors allow to cover the range from 5 to 36 mm • To be used sliding hammer or counter stay • Well-composed set • Hard and wear-resistant titanium nitrided surfaces providing a better and heat-resistant surface protection • Application: • Insert internal extractor into bearing and screw in spindle • The sharp shells press behind the part to be removed • Place sliding hammer or counter stay in position • Plastic box​ Internal extractor set 1 R K è 4 • Internal extractor set, contents: 1788 T-1 ∙ 1788 T-8.5 1788 T-15 ∙ 24 ∙ 36 1788 T/5 – – 5 133666 • Sliding hammer (sliding weight 200 g) with coupler thread M 10 • For the removal of caps with inside thread, ball bearings, pulleys etc. • To be used with stud bolt set 1788 T-1/6 and internal extractors 1788 N-15 to 35 1788 T-1 M10 226 – 134304 ​• Application: For the removal of different caps with inside thread • 6-piece set, stud bolts with M 10 coupler thread, contents: 1 piece each threaded insert M 4, M 5, M 6, M 8, M 10, M 12 To be used with sliding hammer 1788 T-1​ Stud bolt set 1 è 4 1788 T-1/6 6 141647 Internal extractor