Hazet 2019 Tool Catalogue

Made in Germany Made in Germany Made in Germany U V Made in Germany / Made in Germany Made in Germany 1786 S 1775 N 1775 N 1775 N 1775 N 1780 237 Components and spare parts from page 474 to 482 Valid until December 31, 2019 Hand tools Separator Separator ​• The separator is closed by tightening the nuts on the stud bolts • Surface: galvanised/burnished Separator 1 t R 4 1775 N- 60 5– 60 M10 135936 1775 N- 75 12– 75 M10 134540 1775 N-115 22–115 M14x1.5 134656 ​• Application: Extracting ball bearings, roller bearings and inner rings • Together with separator HAZET 1775 N-60 ∙ 75 ∙ 115, the tension bolts are screwed into the threaded holes of the separation jaws • Surface: galvanised/burnished Puller 1 U Spindle Tension Bolts 4 1775 N-12 40–120 M 14x120 mm M 10 134922 1775 N-16 60–165 M 15x170 mm M 10 134588 1775 N-21 70–215 G 1 ⁄ 2 ″x210 mm M 14x1.5 134618 ​• Per pair • Surface: burnished, oiled • For 1775 N-12 and -16 Extension 1 K R 4 1775 N-012 100 M10 134366 • For very confined spaces and tightly adjusted bearings ​• Separators and pullers with extension • The tension bolts are screwed into the threaded holes of the separation jaws together with the separators • The separator is closed by evenly tightening the nuts on the stud bolts • Sheet metal box (HAZET-blue) Separator and puller set 1 U è 4 1775 N 1775 N-16 • 1775 N-75 • 1775 N-012 1775 N/4 60–165 4 133208 1775 N 1775 N-21 • 1775 N-115 1775 N-1/4 70–215 4 133215 ​• Per piece • For pullers 1786 S-1 and S-2 as well as 1787 S-1 and S-2​ Slender puller hook 1 a 4 Puller hook (100 mm) For HAZET 1786 S-1 ∙ 1787 S-1 ∙ 1786S/12 1786 S-100 100 134762 Puller hook (150 mm) For HAZET 1786 S-1 ∙ 1787 S-1 ∙ 1786S/12 1786 S-150 150 134816 Puller hook (200 mm) For HAZET 1786 S-1 ∙ 1787 S-1 ∙ 1786S/12 1786 S-200 200 134779 Puller hook (220 mm) For HAZET 1786 S-1 ∙ 1787 S-1 ∙ 1786S/12 1786 S-220 220 134823 Puller hook (250 mm) For HAZET 1786 S-1 ∙ 1787 S-1 ∙ 1786S/12 1786 S-250 250 134786 Puller hook (300 mm) For HAZET 1786 S-1 ∙ 1787 S-1 ∙ 1786S/12 1786 S-300 300 134830 • Proven and economical system • Application: Wedge-shaped fork end allows fast removal of push rod and steering tie rod ends, pitman arms and other parts of the steering • Easy application • Also suitable for removing shock absorbers and other separation work • Application possible in confined spaces • Sturdy forged design Removal and assembly fork 1 M N 5 4 1780-18 340 80 18 133345 1780-23 340 80 23 133352 1780-29 350 80 29 133376